Attention: current browsing session uses filtered data.

Sample attributes view

This view provides several methods to define a global filter that will limit browsing in Vizome to a subset of samples.

No clinical data found.

Bar charts
Scatterplot
List
Genetics
Data dictionary

Click on a small bar graph below to open it.

In the opened chart, click individual bars to select/de-select samples.

Combine selections across categories with: And Or
Group label (optional)
Compare this group with a second sample group throughout Vizome by selecting another group.
Note: a second group cannot be saved if it contains samples that are part of the first group. The current selection includes samples that are already in the first group.
Second group label (optional)

Select an attribute for the X axis:

Select an attribute for the Y axis:

Note: Serial table is limited to four attributes. Please remove one or more before adding others.
Select an attribute:

Loading data...

Patient ID
Timepoint 1
Timepoint 2
Timepoint 3
Timepoint 4
Combine selections across categories with:
Or And
samples saved
0 samples selected

Label for group: Note: Saving this group will replace any sample-based filters set in other panels.

Note: a second group cannot be saved if it contains samples that are part of the first group. The current selection includes samples that are already in the first group.
Compare this group with a second sample group throughout Vizome by entering another list.

Enter the sample or patient IDs that you wish to include, separated by commas or line breaks.

Enter a name for this group of samples, if desired

Note: Saving this group will replace any sample-based filters set in other panels.
Create a subgroup of samples with genetic traits in common. Start by searching for variants in a gene:
Gene
Note: these search results are affected by global filters

No variant data found.

No additional variants found.

Gene
Start
End
Type
Amino acids
Protein position
Ref
Alt
samples saved
0 unique samples selected

Enter a name for this group of samples, if desired

Note: Saving this group will replace any sample-based filters set in other panels

Sample data
Patient data
Hide data

Loading data...

Filtered sample data Export table
All sample data Export table

Loading data...

Patient Data Export table

Data dictionary

Sample and Patient IDs in this instance of Vizome have been updated to match those in the NCI Genomic Data Commons (GDC). Previous versions of the IDs are present in the sample data table accessible on this page, as "LLS_SampleID" and "LLS_PatientID." Click the Sample data button in the bottom half of this page to view and/or download the Sample data table.

Bar charts panel

Note: this information pertains to the bar charts panel. To see information for other panels, click the corresponding panel buttons.

This view displays sample attribute data (also referred to as clinical data).

It presents options for defining a global sample-based filter based on sample attributes such as diagnosis and treatment.

A filter set here will affect the data shown in all views that display and/or export sample-based data.

Data appears in bar chart form, with color-coding for current selections.

Click on a small bar graph (category) to open a larger version of it. In the opened chart, click individual bars to select/de-select samples.

When adding more than one category to the table, you may decide whether to combine selections across categories with "Or" or "And" by clicking those buttons at the top left. Note that within a category, selections will always be combined with "Or." It is only across categories that the combination method can change.

Above the small charts, you will see a count of the total number of samples selected. To save this group of samples as a global filter, enter a label for it, if desired, and click "Save this selection as a group." This will affect all views that display and/or export sample-based data, limiting them to only these samples.

After saving one group, you will have the option to repeat the steps to save another group, in order to compare two groups of samples across Vizome. Note that the two groups must be composed of different samples. If any of the samples in your second group are already included in your first group, the second group cannot be saved.

A global sample group filter set here will replace one set in other panels.

Scatterplot panel

Note: this information pertains to the scatterplot panel. To see information for other panels, click the corresponding panel buttons.

This view displays sample attribute data (also referred to as clinical data).

Samples appear in this plot as circles, with an x and y position determined by clinical data values.

Select a sample attribute from the X axis drop-down menu and one from the Y axis drop-down menu to view a scatterplot.

Control samples can be omitted by checking the "Omit control samples" checkbox.

Clicking "Swap axes" will tranpose the plot.

Serial panel

Note: this information pertains to the serial panel. To see information for other panels, click the corresponding panel buttons.

This view displays sample attribute data (also referred to as clinical data) sorted by sample date for each patient.

It presents the option of defining a global sample-based filter by hand-selecting samples to be included.

A filter set here will affect the data shown in all views that display and/or export sample-based data.

Data appears in tabular form, with "Timepoints" as columns and patients as rows. Sample attributes are added to the table as color-coded rectangles, with a maximum of four per table cell.

Missing or blank sample attribute values are indicated by a crosshatch pattern.

Select a sample attribute category from the drop-down menu to add it to the table. Colored rectangles will be added to the table, and a legend will appear to the right.

Remove a category from the table by clicking the close button in the legend.

In the legend at right, click the checkbox next to a label to select or deselect all samples with that value at once. Click "hide" to hide values, if desired (and "show" to display them again).

When adding more than one category to the table, you may decide whether to combine selections across categories with "Or" or "And" by clicking those buttons at the top right. Note that within a category, selections will always be combined with "Or." It is only across categories that the combination method can change.

You may select/unselect any individual samples at any time by checking or unchecking the box in the sample's table cell.

Below the table, you will see a count of the total number of samples selected. To save this group of samples as a global filter, enter a label for it, if desired, and click "Save as group." This will affect all views that display and/or export sample-based data, limiting them to only these samples.

A global sample group filter set here will replace one set in other panels.

Note: this information pertains to the list panel. To see information for other panels, click the corresponding panel buttons.

No visualizations are displayed in the List panel.

It presents the option of defining a global sample-based filter by entering a list of sample IDs (e.g., "17-00123") to be included.

A filter set here will affect the data shown in all views that display and/or export sample-based data.

Enter a list of sample IDs separated either by commas or line breaks.

To save this list of samples as a global filter, enter a label for it, if desired, and click "Save as group." This will affect all views that display and/or export sample-based data, limiting them to only these samples.

After saving one group, you will have the option to enter a new list of sample IDs to save another group, in order to compare two groups of samples across Vizome. Note that the two groups must be composed of different samples. If any of the samples in your second group are already included in your first group, the second group cannot be saved.

A global sample group filter set here will replace one set in other panels.

Note: this information pertains to the genetics panel. To see information for other panels, click the corresponding panel buttons.

The Genetics panel presents the option of defining a global sample filter based on shared genetic traits. A group of samples can be defined by searching by gene(s) and selecting those samples with the desired variant(s).

Global filters affect the results of searching by gene. Any sample-based filters set here and/or variant filters set here determine what variants will be returned.

A filter set here will affect the data shown in all views that display and/or export sample-based data.

Select a gene via the drop-down menu, and any variants found in that gene will be displayed in tabular form.

The table of results can be sorted by any of the blue underlined column headings (Gene, Start, End, Type, Amino acids, Protein position, Ref, and Alt). Click the headings to sort.

Selecting variants from the results will automatically filter samples to match. Variants can be selected via the "Select all" checkbox at the top of the table, or via individual radio buttons on each row. Selecting "or" will include samples with any of the selected variants, whereas selecting "and" will include only samples with all of the selected variants. Selecting "not" will exclude any samples with that variant. Rows with no radio button selected will be ignored.

As you select rows, the total number of unique samples selected will be updated, below the search results table.

The "Sample data" table below the Genetics panel will also be updated with each selection.

Click the "Start over" button above the search results table at right if you want to remove all rows from the table.

To save the samples you have selected as a global sample filter, give the group a name, if desired, and click "Save as group." This will affect all views that display and/or export sample-based data, limiting them to only these samples.

A global sample group filter set here will replace one set in other panels.

Export data from this selection
Samples
Genes